1.Cleaning & Maintenance
♦Remove metal chips, oil stains, and dust from the body, guide rails, clamps, and cutting area after each work session.
♥Use an air gun or brush to clean the blade area to prevent buildup that may affect cutting precision.
1.Cleaning & Maintenance
♦Remove metal chips, oil stains, and dust from the body, guide rails, clamps, and cutting area after each work session.
♥Use an air gun or brush to clean the blade area to prevent buildup that may affect cutting precision.
2.Lubrication Care
♣Regularly apply lubricant to guide rails, lead screws, and transmission chains according to the machine manual.
♥Use the recommended lubricant to prevent damage from incompatible oils.
3.Cutting Component Inspection
♦Check the saw blade or cutting tool for wear; replace if dull or damaged.
♠Ensure clamps and guide rails function properly to prevent workpiece slipping.
4.Electrical System Maintenance
♣Inspect wiring for aging, looseness, or short circuits to ensure stable operation.
♥Regularly clean dust inside the electrical box to prevent overheating or short circuits.
5.Cooling System Check
♦Keep coolant clean; replace or filter it regularly to prevent clogging.
♠Ensure the coolant pump operates correctly to maintain optimal cutting temperature.
6.Tightening & Inspection
♣Weekly check for loose screws, bearings, and belts to maintain machine precision.
♥Investigate unusual vibrations or noises and perform timely repairs.
♦Following this routine maintenance ensures efficient and stable operation of your pipe cutting machine, reducing failure rates and boosting productivity.