DSNL thin plate precision leveling machine, SPS thin plate precision leveling machine and STS medium and heavy plate precision leveling machine (parts leveling)

1. Sheet metal stamping press is suitable for precision leveling of various metal 0.1-0.6mm/0.3-1.5mm/0.3-3.0mm metal sheets, mainly for aluminum sheets, copper sheets, stainless steel and other high-demand wires. The leveling accuracy is high, and it is not easy to deform and rebound after leveling;

2. Precision flattening machine flattening wheel and back pressure wheel are made of imported chrome steel and heat treated HRC60. After grinding, and then hard chrome plating, the hard chrome layer is evenly distributed and the shape tolerance of each shaft; the surface of the drum is ground and polished to prevent the material product from being damaged by the rotation of the drum;

3. Customers with extremely high surface requirements can be treated with upper and lower roller rubber (85-90 degrees). The material is resistant to acid and alkali, abrasion and pressure, and will not scratch any material.

4. Machine operation purchase frequency control, free to control the running speed, start and stop have buffer, the material is not easy to shake deformation, the surface is not easy to damage;

5. The adjustment method of the flattening machine adopts four-point independent fine-tooth screw adjustment, four precision dial gauges, and the operation is simple and convenient;

6. It can be installed with front and rear belt input and output lines or automatic drum conveyor lines;

7. The flattening precision of the stamping press is up to plus or minus 0.05mm, depending on the product's different precision; the precision digital display control (accurate to the falling point of 0.01mm), leveling in the form of a full-face descent, The flattening precision is high, the speed regulation is more convenient and simple, and the leveling method achieves a high-precision leveling effect after the product is subjected to multiple internal pressures of the material, and the highest leveling precision can reach 0.05 mm/(cut diagonal 100*100 mm)

8. It can be combined with punching machine and shearing machine to realize automatic continuous production, saving human resources, reducing production cost and improving work efficiency;

9. The stamping flattening machine can be equipped with the function of quickly disassembling the leveling roller. The rollers are directly extracted and cleaned one by one, which can be cleaned more cleanly, and the operation is safer and more convenient;