|What are the advantages of the three-dimensional stamping robot?|
The stamping industry is an industry with high accident rate, high noise and high pollution. Along with the progress of the times, more and more people choose to withdraw from this industry, especially the younger generation in China. However, the demand for the development of the society has increased. With the development of the automation industry, in the stamping processing industry. A wave of punching robots was replaced instead of artificial waves. Depending on the product process and the environment in which it is used, a variety of stamping robots have been designed.
The three-dimensional stamping robot is one of the most common and widely used stamping robots. Since 1990, it has become the mainstream of all walks of life. In recent years, there have been different levels of labor shortages in various places, and the continuous improvement of labor costs has made it difficult for all walks of life to survive. The automation of production processes has become an inevitable trend of development. Its advantages are as follows:
1. In the production process, the three-dimensional stamping manipulator will install multiple sets of molds and continuously automate the production on the same punching machine, which can improve the automation degree of the production process. The three-dimensional stamping manipulator is applied in the production process, which is beneficial to improve the material transfer. Automated processes such as loading and unloading and tool change.
2, the application of the three-dimensional stamping manipulator can improve labor conditions, avoid personal accidents in high temperature, high pressure, low temperature, low pressure, dust, noise, odor, radioactive or other toxic pollution and narrow working space, etc. Operation is dangerous or impossible at all. The application of the three-dimensional stamping manipulator can partially or completely replace the person to complete the work safely, greatly improving the working conditions of the workers. At the same time, in some operations with simple movements and repeated operations, the robot is used instead of manual work to avoid personal accidents caused by operational fatigue or negligence.
3, three-dimensional stamping manipulator can reduce manpower and facilitate rhythmic production. The use of a two-dimensional robot instead of manual work, because the robot can work continuously, this is a side of direct reduction of manpower. Therefore, almost all secondary robots are currently installed on automated machine tools and integrated machining automated production lines to reduce manpower and more accurately control the production of beats, making it easy to produce rhythmically.